You bought a controller with TMR sticks, or you are about to buy one, and you want proof that the sticks sit dead center. This online TMR joystick test gives you that proof in under a minute. Connect your controller, keep your hands off the sticks, and read the live values on screen. If a stick reports movement while nobody is touching it, you will see the number move yourself.
A TMR stick reads a small magnet with a sensor instead of rubbing electrical contacts together, so the sensor does not wear down the way older sticks do. This design makes TMR sticks resistant to drift, but they can still drift. Dust, a loose module, or a calibration offset can still push the readings off center, and testing is the only way to know where your sticks really stand.
Where to Run This Test
The test runs on the Joypad Tester controller tester, the same free tester that runs on our homepage. It works fully inside your browser, so there is nothing to download, nothing to install, and no account to create. Your controller readings stay on your own device.
How to Run the Test
- Connect your controller with a USB cable, its 2.4 GHz dongle, or Bluetooth. A cable gives the most stable connection for a first test.
- Press any button on the controller. This wakes the controller up so the browser can detect it.
- Leave both sticks completely untouched for ten to twenty seconds and watch the X and Y values for each stick.
- Push each stick slowly to every edge, then let go of it. Watch whether the values return to the same resting point each time.
- Press every button and pull both triggers to confirm that each input registers cleanly on screen.
What This Test Checks
| What you check | What you see on screen | What it tells you |
|---|---|---|
| Stick position | Live X and Y values for both sticks | Where each stick is pointing right now |
| Drift at rest | The values while nobody touches the sticks | Whether the stick sends input on its own |
| Return to center | The values after you release a pushed stick | Whether the stick settles back at true center |
| Buttons | Each button lights up when pressed | Whether every button registers cleanly |
| Triggers | Pressure shown from 0% to 100% | Whether the triggers travel their full range smoothly |
| Vibration | The controller rumbles on command | Whether both vibration motors respond |
How to Read Your Results
A healthy stick sits at 0.00 on the X and Y axis at rest, or close enough that the last digits barely move. Small flickers in the final digit are normal electrical noise. After you push the stick and release it, the values should return to that same resting point every time.
A reading that keeps creeping in one direction, or a stick that settles at a fixed offset away from center, points to early drift or a centering problem. Run the test a second time before you judge the controller because one odd reading can come from a loose cable. If the same offset appears in both runs, the problem is real.

Which Controllers Work with This Test
The test works with TMR, Hall effect, and standard sticks because it reads the values your controller reports to the browser. Game-Sir Cyclone 2, 8BitDo, Xbox, PlayStation, and Switch Pro controllers all work. The browser cannot see which sensor type sits inside your controller, so the test treats every stick the same way.

What This Test Cannot Do
This test shows you what your controller is doing, and it cannot repair anything. It cannot calibrate your controller, it cannot say why a reading is off, and it cannot confirm that your controller really has TMR sticks inside, because that information never reaches the browser.
Frequently Asked Questions
Is this TMR joystick test free?
Yes, the test is completely free. You open the page, connect your controller, and read the results without paying anything and without creating an account.
Do I need to download or install anything?
No, the tester runs inside your browser using the Gamepad API, which is a feature built into modern browsers. There is no software to download and no driver to install before you can test.
Why is my controller not detected?
The usual cause is that the controller has not woken up yet, so press any button after connecting it. If it still does not appear, switch to a USB cable instead of Bluetooth and try Chrome or Edge on a computer because desktop browsers detect controllers most reliably.
Can I test my TMR controller on my phone?
Yes, you can try it on your phone if the browser detects your controller. Android phones running Chrome usually detect controllers connected by Bluetooth or by a USB cable with an OTG adapter. Support on iPhones is very limited, so if the sticks do not appear on your phone, run the same test on a computer instead.
Does this test work with Hall effect and standard sticks?
Yes, it works with any controller your browser can detect, including Hall effect and standard potentiometer sticks. The readings mean the same thing for every stick type, so you can compare controllers against each other fairly.
Can this test fix stick drift?
No, a test can only measure drift and show you how large it is. If your readings confirm drift, the fix depends on the cause, and our TMR drift guide walks through the cleaning, calibration, and repair options step by step.
