TMR is the newest stick technology in game controllers, and the term is suddenly everywhere. It appears on new controller boxes, in launch announcements, and in a Sony patent filing that players keep sharing. This article explains in plain words what a TMR joystick is, how it senses your input, and how it compares with the stick technologies that came before it.
How TMR Sticks Work
Every analog stick has to answer one question many times per second: where is the stick pointing right now? A TMR stick answers that question in three steps.
- You tilt the stick, and the magnet fixed under the stick tilts with it.
- The TMR sensor sits in a fixed position below the magnet and feels the magnetic field change as the magnet moves.
- The sensor changes its electrical resistance in response, and the controller chip converts that change into X and Y values.
The effect behind the sensor is called tunnel magnetoresistance, and the same effect has been used in other electronics for years. Controller makers are adopting it now because these sensors have become small enough and cheap enough to fit inside a stick module.

TMR vs Hall Effect vs Potentiometer
Controllers have used three main ways to sense stick position, and the differences explain most of what you hear about stick drift.
| Stick type | How it senses position | Do parts rub? | Drift risk | Power use |
|---|---|---|---|---|
| Potentiometer | A wiper slides across a resistive track | Yes | Highest, because the track wears down | Low |
| Hall effect | A sensor reads a magnet | No | Low, because nothing rubs | Higher than TMR |
| TMR | A TMR sensor reads a magnet | No | Lowest of the three | Lowest of the magnetic types |
Potentiometer sticks are the standard sticks in most controllers sold today, including the standard DualSense and Xbox controllers. Hall effect and TMR sticks are magnetic cousins. Both remove the rubbing contact that causes classic drift, and TMR reads smaller changes in the field while using less power.
Do TMR Sticks Get Stick Drift?
The honest answer is that TMR sticks resist drift far better than potentiometer sticks, and they are not immune to it. The usual cause of drift, a worn track, cannot happen in a TMR stick because there is no track and no rubbing contact. Drift can still appear if dust or debris gets into the stick housing, if the module takes damage, or if the calibration shifts after heavy use. Resistant and immune are two different claims, and only the first one is true.
If you want the full picture, our separate article answers the question do TMR sticks get stick drift in detail, including the rare cases where drift still happens on magnetic sticks.

Which Controllers Use TMR in 2026?
TMR sticks first appeared in premium controllers, and they are spreading into cheaper models fast. Examples you can buy today include the GameSir Cyclone 2, the GameSir G7 Pro, and the 8BitDo Ultimate 2. In October 2026, 8BitDo launched the Ultimate 3C+ with TMR sticks at $39.99, which shows how far the price has already fallen. More brands are expected to follow because the sensors keep getting cheaper.
How to Test Your TMR Controller
Whatever sensor sits inside your controller, a quick test shows you the real state of your sticks. Testing matters with a new controller because it gives you a clean baseline, and it matters later because you can compare new readings against that baseline. Our step by step guide shows you how to test a TMR controller for stick drift, and our online TMR joystick test page walks you through the same checks in a shorter form.
Frequently Asked Questions
What does TMR stand for?
TMR stands for Tunnel MagnetoResistance. The name describes the effect the sensor uses: electrons pass through a very thin layer inside the sensor, and the resistance of the sensor changes as the magnetic field around it changes. In plain words, the sensor can feel a magnet move without touching it.
Is TMR better than Hall effect?
Both are magnetic, and both remove the rubbing contact that wears out potentiometer sticks. TMR sensors read smaller changes in the magnetic field and use less power, which helps in wireless controllers. In normal play the two feel very close, and build quality matters more than the small gap between the two sensor types.
Do TMR sticks last longer?
The sensing parts should last longer because nothing rubs and nothing wears down inside the sensor. The rest of the stick is still mechanical, though, so springs can weaken and plastic parts can wear after years of heavy use. No maker publishes an honest lifetime figure, so any exact number you see online is a guess.
Can I upgrade my current controller to TMR sticks?
Only if replacement TMR modules exist for your exact controller model. A few controllers accept swappable stick modules, and TMR modules are sold for some of them. Most standard controllers were not built for module swaps, so for them the practical route is buying a controller that ships with TMR sticks.
How can I tell if my controller has TMR sticks?
Check the product page or the spec sheet for your model, because the sensor type is listed there when a controller uses TMR. A browser tester cannot tell you which sensor sits inside, since every stick type sends the same kind of values to the computer. If the maker does not mention TMR or Hall effect, the controller almost certainly uses potentiometer sticks.

